LASER DIODE AND FOCUS SEARCH
1. Open the case and turn POWER on with no disc inserted.
2. Confirm that the following operation is performed while observing the objecting lens from the clearance of DVD mechanism deck.
1) Confirm that laser beam is spread.
2) Up and down motion of the objective lens. (2 times)
1. Open the case and turn POWER on with no disc inserted.
2. Confirm that the following operation is performed while observing the objecting lens from the clearance of DVD mechanism deck.
1) Confirm that laser beam is spread.
2) Up and down motion of the objective lens. (2 times)
DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration disc in the store is equipped.
Setting Procedure :
1. Press the [POWER] button to turn the set on.
2. Press the [FUNCTION] button to set DVD/CD function.
3. Insert a disc.
4. Press the [STOP] button and the [EJECT] button simultaneously for five seconds.
5. The message “LOCKED” is displayed and the tray is locked.
The disc tray lock function for the antitheft of an demonstration disc in the store is equipped.
Setting Procedure :
1. Press the [POWER] button to turn the set on.
2. Press the [FUNCTION] button to set DVD/CD function.
3. Insert a disc.
4. Press the [STOP] button and the [EJECT] button simultaneously for five seconds.
5. The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure :
1. Press the [STOP] button and the [EJECT] button simultaneously for five seconds again.
2. The message “UNLOCKED” is displayed and the tray is unlocked.
Note: When “LOCKED” is displayed, the tray lock is not released by turning power on/off with the [POWER] button.
1. Press the [STOP] button and the [EJECT] button simultaneously for five seconds again.
2. The message “UNLOCKED” is displayed and the tray is unlocked.
Note: When “LOCKED” is displayed, the tray lock is not released by turning power on/off with the [POWER] button.
TEST MODE
HOW TO ENTER TEST MODE
While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+) with the DVD player in power on. The Test Mode starts, displayed “SERVICE IN” on this model display then the menu shown below will be displayed on the TV screen.
While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+) with the DVD player in power on. The Test Mode starts, displayed “SERVICE IN” on this model display then the menu shown below will be displayed on the TV screen.
Cold Reset
The cold reset clears all data including preset data stored in the RAM to initial conditions.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press three buttons [PLAY], [FUNCTION] and [POWER] simultaneously.
3. When this button is operated, display as “COLD RESET” for a while and all of the settings are reset.
2. Panel Test Mode
This mode is used to check the software version, FL and KEY.
Display Test Mode
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
3. When the display test mode is activated, all segments are turned on.
4. To exit from this mode, while pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
The cold reset clears all data including preset data stored in the RAM to initial conditions.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press three buttons [PLAY], [FUNCTION] and [POWER] simultaneously.
3. When this button is operated, display as “COLD RESET” for a while and all of the settings are reset.
2. Panel Test Mode
This mode is used to check the software version, FL and KEY.
Display Test Mode
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
3. When the display test mode is activated, all segments are turned on.
4. To exit from this mode, while pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
FL Pattern Test Mode
Procedure:
1. When the display test mode is activated, press the [EJECT] button, to select the FL pattern test mode. When the FL pattern test mode, half segments of FL display.
2. Press the [EJECT] button, half segments of FL display.
3. Next press the [EJECT] button, all segments of FL display is turn on.
4. To exit from this mode, while pressing the [STOP] and the [PLAY]
Procedure:
1. When the display test mode is activated, press the [EJECT] button, to select the FL pattern test mode. When the FL pattern test mode, half segments of FL display.
2. Press the [EJECT] button, half segments of FL display.
3. Next press the [EJECT] button, all segments of FL display is turn on.
4. To exit from this mode, while pressing the [STOP] and the [PLAY]
DVD Version Display
The STR, DVD microprocessor versions are displayed.
Procedure:
1. Press the [POWER] button to turn the set on.
2. Press the [PLAY] button and the [POWER] button simultaneously for three seconds. SC version display is presented.
3. Pressing the [FUNCTION] button presents a DV version display. Pressing the [FUNCTION] button again returns to the SC version display.
4. To exit from this mode, press any button other than the [FUNCTION] button.] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
5. Product Out
The STR, DVD microprocessor versions are displayed.
Procedure:
1. Press the [POWER] button to turn the set on.
2. Press the [PLAY] button and the [POWER] button simultaneously for three seconds. SC version display is presented.
3. Pressing the [FUNCTION] button presents a DV version display. Pressing the [FUNCTION] button again returns to the SC version display.
4. To exit from this mode, press any button other than the [FUNCTION] button.] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
5. Product Out
# This mode moves the optical pick-up to the position durable to vibration and clears all data including preset data stored in the STR RAM to initial conditions. Use this mode when returning the set to the customer after repair.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press the [FUNCTION] button to set the function “DVD/CD”.
3. Remove all discs.
4. While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
5. Displayed to message “SERVICE IN” on the fluorescent indicator tube when pressing in turn the [4] > [DVD MENU] >[CLEAR] buttons on the remote commander.
6. After the “STANDBY” blinking display finishes, the message
“MECHA LOCK” <> “UNPLUG” is displayed on the fluorescent indicator tube disconnect the AC power plug, then theproduct out mode is set.
The STR RAM initialization is executed upon a next power-on after the power is turned off.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press the [FUNCTION] button to set the function “DVD/CD”.
3. Remove all discs.
4. While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [VOLUME] control in the direction of (+).
5. Displayed to message “SERVICE IN” on the fluorescent indicator tube when pressing in turn the [4] > [DVD MENU] >[CLEAR] buttons on the remote commander.
6. After the “STANDBY” blinking display finishes, the message
“MECHA LOCK” <> “UNPLUG” is displayed on the fluorescent indicator tube disconnect the AC power plug, then theproduct out mode is set.
The STR RAM initialization is executed upon a next power-on after the power is turned off.
Không có nhận xét nào:
Đăng nhận xét