TEST MODE (Service mode)
The Following seven test modes are provided for this unit:
1. Mode 1: "VERSION" for confirmation of the versions, "WLAN CH" for confirmation of the wireless LAN channel, "LANGUAGE" for setting of the language.
2. Mode 2: "DISPLAY OFF" for making all LEDs and LCD unlit.
3. Mode 3: "DISPLAY ON" for making all LEDs and LCD lit.
4. Mode 4: "KEY/LED TEST" for confirmation of individual keys.
5. Mode 5: "SW TEST" for confirmation of individual switches.
6. Mode 6: "VOL TEST" for confirmation of the values of the rotary variable controls and the slider values.
7. Mode 7: "SELECTOR TEST" for confirmation of individual rotary selector.
How to Enter Test Mode (Other than Entering WLAN TEST Mode)
While holding the DECK 2 TRANS and DECK 2 CUE buttons pressed, press the STANDBY/ON button to turn the unit on.
(Hold the buttons pressed more than 2 seconds.)
How to Change Test Modes
To change Test modes, turn the DECK 1 Rotary selector clockwise or counterclockwise.
To shift from Mode 7 to Mode 1 or from Mode 1 to Mode 7, press the DECK 1 Rotary selector.
Then, Test modes can be changed again with a turn of the DECK 1 Rotary selector.
Mode 1: "VERSION" for confirmation of the versions,
"WLAN CH" for confirmation of the wireless LAN channel,
"LANGUAGE" for setting of the language.
Immediately after Test mode is entered (Mode 1) the versions, range of settable channels for the wireless LAN, and LANGUAGE setting are displayed on the LCD.
LANGUAGE setting
Select a language by turning the DECK 2 Rotary selector clockwise or counterclockwise then press it to register the selected language. A ">" symbol is displayed at the left of the registered language.
The languages change in the order indicated below.
1: English
2: Japanese
3: Korean
4: Simplified Chinese
Mode 2: "DISPLAY OFF" for making all LEDs and LCD unlit
After this mode is entered, "DISPLAY OFF" will be displayed for about 1 sec. then all indications on the LCDs will disappear and the LEDs will go dark or dim.
Mode 3: "DISPLAY ON" for making all LEDs and LCD lit
After this mode is entered, "DISPLAY ON" will be displayed for about 1 sec. then all indications on the LCDs and all LEDs will light.
Mode 4: "KEY/LED TEST" for confirmation of individual keys
When this mode is entered, "KEY/LED TEST" is displayed on the LCD. In this mode, when a key is pressed, the corresponding LED will light.
# The DECK 1 JOG LEDs (blue) will light one by one if the DECK 1 AUTO BEAT LOOP control is turned.
# The DECK 2 JOG LEDs (blue) will light one by one if the DECK 2 AUTO BEAT LOOP control is turned.
# The LINK indicator LEDs will light one by one if the DECK 1 BEAT control is turned.
# The position of the lit LED for the L-ch LEVEL indicator changes from bottom to top if the DECK 2 BEAT control is turned clockwise. It changes from top to bottom if the DECK 2 BEAT control is turned counterclockwise.
# The position of the lit LED for the R-ch LEVEL indicator changes from bottom to top if the DECK 2 rotary selector is turned clockwise. It changes from top to bottom if the DECK 2 Rotary selector is turned counterclockwise.
Mode 5: "SW TEST" for confirmation of individual switches
When this mode is entered, "SW TEST" is displayed. The set position of each switch is indicated on the LCD.
Mode 6: "VOL TEST" for confirmation of the values of the rotary variable controls and the slider values
When this mode is entered, "VOL TEST" is displayed on the LCD.
The value for each VR or slider that is operated will be indicated.
Mode 7: "SELECTOR TEST" for confirmation of individual rotary selector
When this mode is entered, “SELECTOR TEST” is displayed on the LCD.
# The value for each rotary selector that is operated will be indicated.
# The value will increase if a rotary selector is turned clockwise and decrease if it is turned counterclockwise.
# If the value reaches FF while a rotary selector is turned clockwise and it is then further turned, the value will return to 00 then continue to increase. If the value reaches 00 while a rotary selector is turned counterclockwise and it is then further turned, the value will return to FF then continue to decrease.
To shift from Mode 7 to Mode 1 or from Mode 1 to Mode 7, press the DECK 1 Rotary selector.
"WLAN TEST" for confirmation of the Wireless LAN
While holding the DECK 2 ROLL and DECK 2 CUE buttons pressed, press the STANDBY/ON button. (Hold the buttons pressed more than 2 seconds.)
"WLAN TEST" is indicated on the LCDs, and the SSID selection screens are displayed.
When a wireless device, such as a tablet PC or smartphone, is to be connected for the first time
1. While holding the DECK 2 ROLL and DECK 2 CUE buttons pressed, press the STANDBY/ON button to turn on the unit.
2. Select the SSID to be used for test, by turning the DECK 2 Rotary selector clockwise, then press it to determine the selection. (A ">" symbol is displayed at the left of the determined SSID.)
3. Select the SSID of this unit on the Wireless LAN Setup screen of the wireless device.
4. If in some seconds the indication "NO CONNECT" is changed to "CONNECT" on this unit, connection has been successfully completed.
If connection fails, the "NO CONNECT" indication will remain displayed.
When a wireless device that has been connected with this unit before is to be used
1. While holding the DECK 2 ROLL and DECK 2 CUE buttons pressed, press the STANDBY/ON button to turn on the unit.
2. Select the SSID to be used for test, by turning the DECK 2 Rotary selector clockwise, then press it to determine the selection.
3. If the indication "NO CONNECT" is changed to "CONNECT" on this unit, connection has been successfully completed.
How to Reset to the Factory Default Settings
1. While holding the DECK 2 FLANGER and DECK 2 CUE buttons pressed, press the STANDBY/ON button to turn on the unit. (Hold the buttons pressed more than 2 seconds.)
2. Resetting is completed when "COMPLETE!" is displayed on the LCD.
3. The unit enters STANDBY mode.
Details of DISPLAY OFF" for making all LEDs
Operating keys | LED Name | Operation in the OFF state |
DECK1f (PLAY/PAUSE) button | DECK1f (PLAY/PAUSE) indicator | Unlit |
DECK1 CUE button | DECK1 CUE indicator | Unlit |
DECK1 JOG DRUM button | DECK1 JOG DRUM | Lit dimly |
DECK1 SAMPLE LAUNCH button | DECK1 SAMPLE LAUNCH | Lit dimly |
DECK1 AUTO BEAT LOOP control (PUSH) | DECK1 AUTO BEAT LOOP indicator | Unlit |
DECK1 SYNC button | DECK1 SYNC | Lit dimly |
DECK1 TEMPO RANGE button | DECK1 MASTER (SYNC) | Unlit |
DECK1 MASTER TEMPO button | DECK1 MASTER TEMPO | Unlit |
DECK1 USB button | DECK1 USB | Lit dimly |
DECK1 MIDI button | DECK1 MIDI | Lit dimly |
DECK1 rekordbox button | DECK1 rekordbox | Lit dimly |
DECK1 TRANS button | DECK1 TRANS | Unlit |
DECK1 FLANGER button | DECK1 FLANGER | Unlit |
DECK1 ECHO button | DECK1 ECHO | Unlit |
DECK1 ROLL button | DECK1 ROLL | Unlit |
DECK1 Rotary selector (PUSH) | DECK1 ROLL | Unlit |
DECK1 Jog dial (TOUCH) | DECK1 JOG DRUM | Unlit |
DECK1 Jog dial (ROTATE) | JOG RED11 - 14, JOG BLUE11 - 14 | Unlit |
DECK1 SHIFT button | JOG RED11 | Unlit |
DECK1 BACK (TOP) button | JOG RED12 | Unlit |
DECK1 TIME (AUTO CUE, QUANTIZE) button | JOG RED13 | Unlit |
DECK1 INFO (UTILITY) button | JOG RED14 | Unlit |
DECK1 AUTO BEAT LOOP control (ROTATE) | JOG BLUE11 - 14 | Unlit |
DECK2f (PLAY/PAUSE) button | DECK2f (PLAY/PAUSE) indicator | Unlit |
DECK2 CUE button | DECK2 CUE indicator | Unlit |
DECK2 JOG DRUM button | DECK2 JOG DRUM | Lit dimly |
DECK2 SAMPLE LAUNCH button | DECK2 SAMPLE LAUNCH | Lit dimly |
DECK2 AUTO BEAT LOOP control (PUSH) | DECK2 AUTO BEAT LOOP indicator | Unlit |
DECK2 SYNC button | DECK2 SYNC | Lit dimly |
DECK2 TEMPO RANGE button | DECK2 MASTER (SYNC) | Unlit |
DECK2 MASTER TEMPO button | DECK2 MASTER TEMPO | Unlit |
DECK2 USB button | DECK2 USB | Lit dimly |
DECK2 MIDI button | DECK2 MIDI | Lit dimly |
DECK2 rekordbox button | DECK2 rekordbox | Lit dimly |
DECK2 TRANS button | DECK2 TRANS | Unlit |
DECK2 FLANGER button | DECK2 FLANGER | Unlit |
DECK2 ECHO button | DECK2 ECHO | Unlit |
DECK2 ROLL button | DECK2 ROLL | Unlit |
DECK2 Rotary selector (PUSH) | DECK2 ROLL | Unlit |
